Solar Options
Roboteos has created the Solotrope which is a compact hinge mounted platform that articulates to follow the sun so the panels receive the optimal amount of sunlight to produce even more power than traditional flat-mounted systems. In simple terms, this system is like a sunflower! The Trekko system consists of the Solotrope 600 Series Kit and the Victron Energy SmartSolar MPPT 100/50 to better gather and store all that extra power.
FVG 1000w Solar Upgrade
If you’re looking for a more traditional route with ample power, check out our Rich Solar based system! This kit is fitted with five Rich solar 200W solar panels. We include the Victron Energy SmartSolar MPPT 150/85-Tr VE.Can, which is needed to store the amount of extra power the amount of potential solar charging will produce. Also included are Victron Energy Midi Fuses and Holders.
Looking for an extra 320ah of power? Well, look no further than our Ekko 2nd Battery Upgrade including the Lithionics 320ah lithium battery equipped with NeverDie® BMS. Included in the kit are battery tie downs, tie down bolts, and necessary battery cables.
The kit comes with a pre-configured Victron 50a Orion DC to DC charger, fuses and wires required for installation. The DC-DC Kit will boost charging by up to 50A from idle to redline, so you will see up to 100A at idle and up to 220A of charge when driving! Additionally, this kit can act as a redundant backup to the auxiliary alternator system installed by Winnebago. If the auxiliary alternator goes down, this will provide up to 50A of charging from the stock Ford Transit alternator. The DC-DC Converter kit truly shines when it is paired with the Lithionics 2nd battery upgrade.
The Xantrex Inverter/ Charger is fastest way to charge up on shore power! A direct drop-in (for most cases) on the Winnebago Ekko Chassis to increase your shore power charging from 80 to 120amps DC of charge! Typically a direct replacement for your Ekko in both locations (under the seat and battery compartment). If you’re into DIY, this install is simple with a bit of time and a few hand tools. Add on the Xantrex Bluetooth Inverter Controller to easily monitor system status, alerts, desired system parameters and settings, and more! You can also download the app to conveniently monitor your system on your phone or tablet.
FVG Trekko L-Bench Conversion
L-Bench w/ 3rd Battery
Our new Trekko L-Bench Dinette is a great way to add more seating space to your Transit Ekko. But did you know it also makes it possible to add in even MORE batteries?! When you opt for the L-Bench you gain the ability to add on a 3rd battery which will include another Lithionics 320ah lithium battery, AMP Seal, and necessary circuit breaker.
4th Battery Add-On
Take your electrical system to the absolute max! When you add on the Trekko L-bench, there is room for not one, but TWO batteries inside. This means you can add on a 4th battery! This will take your Transit Ekko electrical system up to 1280ah of power.